Welcome to the official website of Shenzhen Eazylift Technology Co., Ltd.
language
All Categories>
Common machine faults
2019-12-16
| Failure and repair methods | |||||
| Fault phenomenon | possible reason | Solution | |||
| The door cannot move | No power, no power | Turn on the power | |||
| Blocked door | Remove obstacles | ||||
| Blown fuse | Replace with new | ||||
| Door imbalance | Keep the door balanced | ||||
| The door will rebound automatically without encountering resistance | Improper adjustment of door rebound sensitivity | Readjust the rebound sensitivity | |||
| The drive unit can be controlled, but the remote control cannot | The remote control indicator does not light | Low battery or open circuit | |||
| The remote control has not been coded | Recode | ||||
| The antenna on the drive unit is wrapped | Extend the antenna | ||||
| Dead battery | Replacement battery | ||||
| The door cannot be completely closed or opened | Run away | Reset itinerary | |||
| Courtesy light does not work | The lamp burned out | Replace with new | |||
| The remote control is close | The remote control or high frequency board is broken | Replace with new | |||
| The machine is loud | There is a problem with the motor | Replace the motor | |||
| The machine is noisy | Motor noise | Replace the motor | |||
| Iron gear and large gear disc friction | Replace iron gear | ||||
Alibaba
Hello, if you have any questions, please contact us, welcome to submit any questions and suggestions about us, we will reply you asap.. Thank you for your help. We are at your service 7 * 24
Tel: (86)755-33828381 Fax: (86)755-33828386
Address:No.9, Fuyu Road, Fucheng'ao Industrial Zone, Pinghu
Street, Longgang District, Shenzhen