Welcome to the official website of Shenzhen Eazylift Technology Co., Ltd.

language

    FAQ
    %{tishi_zhanwei}%

    All Categories>

    How does the sliding door work?

    Install a rack at the corresponding position of the bottom (top) of the prepared sliding door, fix the door opener firmly, turn on the power, and drive the gear of the motor to move the rack on the door to make it reciprocate linearly. Remote control to control the running state of the sliding door can realize the opening and closing of the door. Its main components are: translation gate, drive motor, control system, running track.

    What is an electric sliding door?

    It refers to an electric door with a walking wheel at the bottom (or a hanging wheel at the top), which is in the form of a plate and walks straight back and forth on the track. Some also call it sliding door, sliding door, straight door, sliding door, sliding door, etc. Its material can be composed of stainless steel, iron pipe, steel plate, wood, etc., the size can be determined according to the site, the appearance and shape are varied, and it is very varied.

    Common machine faults

    Failure and repair methods

    How much KG is the motor N · M converted, or how many N is it converted into?

    1KG = 9.8N1N · M = 10KG = 98N Example: How much KG can 6N motor drive? How much is N 6N · M = 60KG = 588N

    What is the difference between a rolling code remote control and a fixed code remote control?

    The so-called fixed code is that the address code issued by the remote control is fixed and unchanged, for example, an encoding chip. Is: 226222605026-15026-25026-35026-4FP527SMC918PT2240EV1527HT12DHT12E and other chip remote controllers. Our company generally uses the EV1527 rolling code remote control: the encoder detects the key input and wakes up the system from the power saving state. The synchronization count is increased by 1 and the serial number is encrypted with the key to form the ciphertext data, and the same Key and other data are sent out. Since the synchronization count value

    How to use the remote controller?

    (1) The copyable remote controller can be copied with IC models of 2262/2260 / EV1527 / 2240; EV527 / HT6P40 and compatible ICs. (2) No need to consider oscillation resistance, this product is automatically compatible with oscillation resistance. (3) ICs such as HCS300.HCS301 and compatible rolling ICs that cannot be copied by the remote controller. (4) The copying remote controller has a fixed working frequency, which is usually 315 / 433MHZ. Copy (copy) method: (1) Determine the operating frequency of the remote control and the chip number. (2) In order to clear the code that comes with the factory test, you can press the two buttons on the top of the universal remote control at the same time (must be at the same time, not for half a second). After 3 seconds, the LED indicator on the remote control starts Continuous flashing, indicating that the code inside the remote control has been cleared, then release it. (3) Keep the remote controller to be copied and the product as close as possible (the distance should be less than 10 mm, you can rotate around 360 degrees to find the best copy sensing point), (4) Press the universal remote controller and the original remote controller The first corresponding button, the indicator light of the universal remote controller flashes continuously after 3 seconds, indicating that the code of this button has been successfully copied, and then all are released. Then copy the second corresponding button, and press the second corresponding button on the universal remote controller and the original remote controller at the same time. After 3 seconds, the indicator light of the universal remote controller continues to flash, indicating that the code of this button has been successfully copied, and then both After releasing. Then copy the third and fourth buttons as above. Copy is complete. (5) If the original remote control has only two or three buttons, just copy a few buttons, and the extra buttons will be left empty.

    How to use the remote controller?

    The copy remote controller is also called self-learning remote controller or universal remote controller. It is very simple to use and does not require much expertise. As long as the operating frequency is the same, the copied remote control chip can be copied. You can quickly copy various fixed codes and learning codes remote control. In just a few steps, you can integrate two or more remote controls into one remote control host. The copy remote controller can copy most of the wireless remote controllers on the market. Do not release the lock key of the copy remote control with your right hand. The LED light of the remote control will go out after 8 seconds.

    < 123 >

    Alibaba

    WeChat

    Hello, if you have any questions, please contact us, welcome to submit any questions and suggestions about us, we will reply you asap.. Thank you for your help. We are at your service 7 * 24

    Tel: (86)755-33828381  Fax: (86)755-33828386

    Address:No.9, Fuyu Road, Fucheng'ao Industrial Zone, Pinghu
    Street, Longgang District, Shenzhen

    300.cn

    Shenzhen

    SEO

    Business License